 
Catalog #: 1756-OX8I
		
	
		
	
| Suitable for safety functions | No | 
| Digital inputs configurable | No | 
| Digital outputs configurable | No | 
| Voltage type of supply voltage | DC | 
| Type of voltage (input voltage) | DC | 
| Type of digital output | Relay | 
| Type of electric connection | Screw connection | 
| Bounce time, mean | 1.2 μs | 
| Total backplane power | 2.9 W | 
| Thermal dissipation | 10.57 BTU/h | 
| Current draw | 100 mA @ 5.1V, 100 mA @ 24V | 
| Expected contact life | 300 kHz, resistive, 100 kHz, inductive | 
| Module keying | Electronic, software configurable | 
| Outputs | 8 N.O., 8 N.C. individually isolated (two points per group) | 
| Scheduled outputs | Synchronization within 16.7 s max, reference to the coordinated system time | 
| Power dissipation, max | 3.1 W @ 60 °C (140 °F) | 
| Contact current rating | 1 A @ 5...30V DC, 0.5 A @ 48V DC, 0.22 A @ 125V DC, 1.5 A @ 120V AC, 50/60 Hz, 0.75 A @ 240V AC, 50/60 Hz | 
| Isolation voltage | 250V (continuous), basic insulation type, outputs-to-backplane, and output-to-output | 
| Wire category | Wire category: 1 | 
| Fusing | Not protected. A fused IFM is recommended to help protect outputs | 
| Redundancy | No | 
| Short-circuit protection, outputs available | No | 
| Pilot duty | C300, R150 | 
| Initial contact resistance, max | 100 mΩ @ 6V, 1 A | 
| Switching frequency, max | 1 operation/3 s (0.3 Hz at rated load) | 
| States in fault mode per point | Hold last state, On or Off (Off is default) | 
| States in program mode per point | Hold last state, On or Off (Off is default) | 
| Slot width | 1 | 
| RTB keying | User-defined mechanical | 
| Shock | Operating: 30 G, Non operating: 50 G | 
| Vibration | 2 G @ 10...500 Hz | 
| Surrounding air temperature, max | 60 °C | 
| North American temperature code | T4A | 
| Emissions | IEC 61000-6-4 | 
| ESD immunity | 6 kV contact discharges, 8 kV air discharges | 
| Relative humidity | 5...95% noncondensing | 
| Conducted RF immunity | 10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz | 
| EFT/B immunity | ±4 kV at 5 kHz on signal ports | 
| Operating temperature | 0 to 60 °C | 
| Surge transient immunity | ±1 kV line-line (DM) and ±2 kV line-earth (CM) on signal ports | 
| Radiated RF immunity | 10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz | 
| Nonoperating temperature | -40 °C | 
| Oscillatory surge withstand | IEEE C37.90.1: 3kV | 
| Off-state leakage current per point, max | 0 mA | 
| Load current per point, min | 10 mA | 
| Output delay time | OFF to ON: 13 ms maximum, ON to OFF: 13 ms maximum | 
| Operating voltage | 5...125V DC, 10...240V AC | 
| Enclosure type | None (open-style) | 
			 
 
		
			 
 
		
			
		
Name: Sophie Wang
Mobile:+86 18681453433
Tel:+86 18681453433
Whatsapp:8613244706006
Email:sophie@meterbook.com
Add:Jingying Plot,Baoan District,Shenzhen City,Guangdong Province,China
We chat
